Steel is the strongest material for lift frames on the market and Basta™ uses a long proven hot-dip galvanizing process that covers the entire lift, inside and out, with a heavy, long lasting layer of protective zinc.
Galvanized steel is usually the best choice if you must power your boat onto the lift in shallow water, if your boat weighs over 6,000 pounds or if your installation is in water over 10 feet deep.
Galvanized steel boat lifts are outstanding for both fresh and salt water. While they may show minor rust over time, they are more rugged, suffer less wear and are less prone to electrolysis than aluminum lifts. They excel in extreme conditions and truly stand the test of time.
4,000 to 10,000 pound capacities
48 inch and 60 inch lifting heights
Heavy duty, yet easy to assemble
Security you can depend on
Make your dream boat a dream to use anytime you want.
Press a button on your key fob to lower it part way and load your gear,
then lower the lift just enough to idle away in reverse.
When you return to the dock, just drive in and use the remote control to make your boat secure from the ground up.
SP lifts work in water as shallow as 23 inches and have been installed in water up to 25 feet deep.
These free-standing, self-contained boat lifts feature
our patented Over-Center™ gravity locking, 'balanced-load' H-frame
technology with single or dual aluminum-bore hydraulic cylinders,
stainless steel hose fittings, duplex-bonded synthetic hydraulic
hoses, full length rotating carpeted bunks and marine grade hardware.
Each lift's hydraulic power pack is
housed in an attractive white fiberglass dock box
with a lockable lid, manual operation switches and a solar panel recharger.
The hydraulics use a special long-life, environmentally friendly, non-glycol based fluid. Wireless remote key-fob controls are included.
12,000 to 30,000 pound capacities
60 inch lifting heights
Wide beam bunk supports, or dry dock
inspired full length keel support with bunks
Basta™ lifts extend the life of your treasured boat by guarding it from floating debris, damaging waves,
marine growth and electrolysis. Protect your big
boat better by investing in the strongest lift available. There is really no
comparison between a Basta™ SPH galvanized boat lift and any aluminum lift – just shake
'em and you'll definitely feel the difference.
Preserve your investment with a boat lift you can depend on. These lifts are rock solid and built to last.
SPH Series free standing self-contained boat lifts feature our patented Over-Center™ gravity locking, inline H-frame technology, four or six aluminum-bore hydraulic cylinders, dock mounted exchange manifolds, stainless steel cylinder/hose fittings, duplex-bonded synthetic hydraulic hoses, white fiberglass dock box with lockable lid, solar recharger, manual on/off and up/down switches, key-fob remote controls, full length keel support with rotating carpeted bunk rails and marine grade hardware.